Home/Products/Industrial ovens and preheating equipment/Circulation/fresh-air ovens

Convection fresh air ovensTRUS series

Circulating fresh air ovens for tempering, drying and preheating plastic granulates, rubber and plastic molded parts as well as tools. TRUS up to 140 °C, TRUS/T up to 300 °C. Robust, quiet and energy saving.

300°C Max. temperature
Teflon Coating
Special According to customer requirements
Enquire about drawer oven → All industrial ovens
Drawer oven with linearly guided supports from Ihne & Tesch
Application

Applications

Drawer ovens with Teflon-coated supports and ball-bearing full extensions for unhindered removal. Baffle plates prevent heat loss when drawers are pulled out. Drying times can be set per level via time relays.

  • Heating plastic sheets for deformation processes
  • Drying of solvent-free steel parts
  • Heating of plastic moldings
  • Tire production (linearly guided supports)
  • Single-chamber or multi-chamber design
Options
  • Different operating voltages and powers
  • Oven chamber material: galvanized, hot-aluminized steel or stainless steel
  • Aluminum or stainless steel drawers
  • Drawer bottoms made of perforated sheet metal (square or round perforations)
  • Electronic PID temperature control with solid state relay
  • Program controller with up to 20 programs with 16 segments each
  • Multi-chamber dryer
  • Doors at the front and back
  • Viewing window for visual monitoring
  • Accessible versions with interior release (2006/42/EG)
  • Multi-channel graphic recorder for temperature documentation
  • Interfaces according to customer specifications
Quick info
type Drawer oven Linearly guided supports
Max. temperature 300 °C
Airflow Horizontal / Vertical
Conditions Teflon coated Ball-bearing full extensions
loading Hand or crane
Construction method Custom made Single or multi-chamber
Areas of application

Industries & Applications

Drawer ovens for different processes:

plastic panels Thermoforming Steel parts Tire manufacturing moldings Packaging industry
Application examples

Customer examples

CUSTOMER EXAMPLE 1 - UP TO 220 °C - 3,000 × 2,100 × 1,600 MM - A# 1361482
Dimensions3,000 × 2,100 × 1,600 mm
Operating temperatureup to 220 °C
Heating output45kW
Circulation fan3×1.1kW
Airflowvertical

(W × D × H) This oven with linearly guided supports is used to heat thermoplastic sheets (dimensions 2,900 × 2,000 mm) for the subsequent forming process.

Design
  • Electronic temperature control with three control points
  • Overtemperature protection device consisting of three electrical overtemperature protection controllers
  • Eight loading levels, Teflon coated to hold the plastic panels. The supports are equipped with ball-bearing full extensions (2,000 mm) on the sides
  • Drying time for each level can be set using a time relay, with a visual message when the drying time has elapsed
  • After removing the heated plastic plate, the limit switch resets the relevant time relay
  • Oven chamber made of aluminized sheet steel
  • At the front there is a double oven door with forced-opening aluminum flaps
  • Power switching: solid state relay
gallery
Drawer oven customer example 01 01Drawer oven customer example 01 02Drawer oven customer example 01 03
CUSTOMER EXAMPLE 2 - UP TO 120 °C - 1,200 × 750 × 1,220 MM - A# 1357387
Dimensions1,200 × 750 × 1,220 mm
Operating temperatureup to 120 °C
Heating output13.5kW
Circulation fan1.1kW
Airflowhorizontal

(W × D × H) This oven with linear guide supports is used to heat solvent-free steel parts.

Design
  • electronic temperature control
  • Over-temperature protection
  • Five support trays to hold the steel parts
  • The supports are equipped with ball-bearing partial extensions (450 mm) on the sides. Load capacity of a support tray: 150 kg static
  • Wiring and component selection according to customer specifications
  • Oven chamber made of sheet steel
  • Power switching: solid state relay
  • Blind plates on the interior side wall to subsequently optimize the temperature tolerance
  • adjustable fresh air and recirculated air slider
gallery
Drawer oven customer example 02 01Drawer oven customer example 02 02Drawer oven customer example 02 03Drawer oven customer example 02 04
CUSTOMER EXAMPLE 3 - UP TO 150 °C - 300 × 600 × 950 MM - A# 2011704
Dimensions300 × 600 × 950mm
Operating temperatureup to 150 °C
Heating output3×2kW
Circulation fan3×0.18kW
Airflowhorizontal

(W × D × H) This drawer oven is used for heating solvent-free plastic parts.

Design
  • Electronic temperature control with three control points
  • Overtemperature protection device consisting of three electronic overtemperature protection controllers
  • Drawers made of perforated stainless steel sheet with heat-insulated handle panels on the front
  • The drawers are equipped with bulkheads that prevent air from escaping when pulled out
  • Blind plates on the interior side wall to subsequently optimize the temperature tolerance
  • Base frame equipped with fixed and swivel castors
  • Oven chamber made of galvanized sheet steel
gallery
Drawer oven customer example 03 01Drawer oven customer example 03 02Drawer oven customer example 03 03Drawer oven customer example 03 04Drawer oven customer example 03 05Drawer oven customer example 03 06
Related products

More industrial ovens

Industrial ovens and preheating ovens from Ihne & Tesch.

Continuous ovens
Continuous ovens
For foils and parts
Universal solution for preheating, tempering, drying and curing.
upon request
Laboratory ovens
Laboratory ovens
Standard & Special
For research, medicine, microbiology. As an incubator or multi-chamber oven.
up to 300 °C
Bogie hearth ovens
Bogie hearth ovens
With loading aids
For heavy parts with loading aids at the same height.
up to 450 °C

Drawer ovenenquiry

Drawer ovens · linearly guided supports · up to 300 °C · custom-made

+43 7434 43880-0 info@kitmail.at