Operating temperatureup to 300 °C
Heating output3×2.05kW
Circulation fan3×45W
Laboratory oven with 3 separately controllable chambers This laboratory oven is part of a production system in which the plastic and metal parts to be heated require precise temperature control. By using 3 separately controllable chambers, different setpoints can be set if necessary. The neighboring chambers are also not affected when material is added or removed from one chamber. The laboratory ovens are designed individually for each system in order to meet the exact requirements of the customers.
Design
- Operating voltage: 3x 400 volts, 3 phases/PE 50Hz
- Control voltage: 230 volts via transformer
- Temperature control: electronic industrial controller, range: 0 to 320°C, sensor: thermocouple type L
- Support shelves in the interior made of stainless steel sheet
- Louvre plates on the air inlet sides
- Outer casing material: sheet steel
- Double-walled viewing windows in the dryer doors for visual monitoring
- Robust stainless steel lever locks
- Painting of the outer casing: structured paint RAL 4006 traffic purple
- Paint control box structured paint RAL 7035 light gray
- Oven chamber material: stainless steel sheet material no. 1.4541 or 1.4301
- Continuous sound pressure level: < 70 db (A) measured in front of the laboratory oven at a distance of 1 m from the control box and 1.6 m height from the floor
gallery
