Home/Products/Industrial ovens and preheating equipment/Ovens with roll-up, lifting and hinged doors

Roll-up doors, lifting doorsOvens with hinged doors

Industrial ovens for confined spaces, floor-level loading and large components. Depending on the installation situation with a lifting door, hinged door or roll-up door.

300°CExamples up to
6Customer examples
Custom designDoor concept
Enquire about oven →All industrial ovens
Ovens with roll-up, lifting and hinged doors
Application

When standard doors are not enough

Roll-up, lifting and hinged doors are used when installation space is limited, heavy loading trolleys have to enter at floor level or the process requires a particularly defined door movement.

  • Lifting doors for compact systems with vertically opening oven chamber doors
  • Roll-up doors for low hall heights or floor-level loading
  • Hinged doors for special processes and short loading routes
  • Individual air flow, control and feeding according to component and process
Quick info
Door conceptsLifting doorRoll-up door · hinged door
Temperatureup to 300 °Caccording to customer example
DesignCustom designprocess and space optimized
Areas of application

Typical applications

plastic panelsSteel partsDiamond saw ropesGraphite componentsloading trolley
Application examples

Customer examples

CUSTOMER EXAMPLE 1 - up to 140 °C - 380 × 510 × 620 mm
Dimensions380 × 510 × 620mm
Operating temperatureup to 140 °C
Heating output3kW
Circulation fan0.18kW
Airflowvertical

(W × D × H) This lifting door oven is used for heating steel parts.

Design
  • electronic temperature control
  • electronic over-temperature protection
  • Drying time can be set via time relay, after which there is a visual message
  • Door limit switch resets time relay after opening the door
  • Oven chamber made of sheet steel
  • Door opening upwards relieved with cable pull and counterweights
  • All-round temperature-resistant sealing bristles on the door
gallery
Roll-up door lifting door hinged door oven customer example 01 01Roll-up door lifting door hinged door oven customer example 01 02Roll-up door lifting door hinged door oven customer example 01 03
CUSTOMER EXAMPLE 2 - up to 140 °C - 380 × 510 × 620 mm - A# 1356637
Dimensions380 × 510 × 620mm
Operating temperatureup to 140 °C
Heating output3kW
Circulation fan0.18kW
Airflowvertical

(W × D × H) This lifting door oven is used for heating steel parts.

Design
  • electronic temperature control
  • electronic over-temperature protection
  • Drying time can be set via time relay, after which there is a visual message
  • Door limit switch resets time relay after opening the door
  • Oven chamber made of sheet steel
  • Door opening upwards relieved with cable pull and counterweights
  • All-round temperature-resistant sealing bristles on the door
gallery
Roll-up door lifting door hinged door oven customer example 02 01Roll-up door lifting door hinged door oven customer example 02 02Roll-up door lifting door hinged door oven customer example 02 03
CUSTOMER EXAMPLE 3 - up to 220 °C - 3,000 × 900 × 1,600 mm - A# 1280697
Dimensions3,000 × 900 × 1,600mm
Operating temperatureup to 220 °C
Heating output27kW
Circulation fan3×1.1kW
Airflowhorizontal

(W × D × H) This lifting door oven is used to heat thermoplastic sheets (dimensions 2,700 × 800 mm) for the subsequent forming process.

Design
  • electronic temperature control
  • Overtemperature protection device consisting of three electronic overtemperature protection controllers
  • Power switching: solid state relay
  • Two loading levels, each with 3 Teflon-coated stainless steel drawers
  • Pneumatically operated lifting doors equipped with 2-leaf protective doors
  • Chain transmission for synchronizing the door movement
  • Oven chamber made of galvanized sheet steel
  • Horizontal airflow
  • Blind panels on the rear of the interior for subsequent optimization of temperature tolerance
  • adjustable fresh air and recirculated air slider
gallery
Roll-up door lifting door hinged door oven customer example 03 01Roll-up door lifting door hinged door oven customer example 03 02
CUSTOMER EXAMPLE 4 - up to 120 °C - 1,000 × 850 × 500 mm - A# 1356187
Dimensions1,000 × 850 × 500mm
Operating temperatureup to 120 °C
Heating output6kW
Circulation fan2 × 0.18kW
Airflowvertical

(W × D × H) This hinged door oven is used to heat diamond saw ropes for the subsequent processing process.

Design
  • Temperature control via microstat
  • Over-temperature protection device
  • Time relay for dryer operation, switches off the dryer after expiration
  • Oven chamber made of sheet steel
  • On the front there is a single-leaf door that can be opened downwards; there are also 2 door support consoles screwed onto the front
  • In the interior there are 3 stainless steel drawers with bases made of perforated sheet metal perforation 5 × 5 mm
  • Base frame of the dryer with fixed and swivel castors
  • Blind panels on the rear of the interior for subsequent optimization of temperature tolerance
  • adjustable fresh air and recirculated air slider
gallery
Roll-up door lifting door hinged door oven customer example 04 01Roll-up door lifting door hinged door oven customer example 04 02Roll-up door lifting door hinged door oven customer example 04 03Roll-up door lifting door hinged door oven customer example 04 04
CUSTOMER EXAMPLE 5 - up to 230 °C - 2,000 × 1,950 × 2200 mm - A# 1291592
Dimensions2,000 × 1,950 × 2,200 mm
Operating temperatureup to 230 °C
Heating output36kW
Circulation fan2×1.1kW
Airflowhorizontal

(W × D × H) This roll-up door oven is used for heating thermoplastic plastic parts.

Design
  • electronic temperature control
  • Overtemperature protection device consisting of two electronic overtemperature protection controllers
  • with digital timer
  • Power switching solid state relay
  • Double-layer roll-up door door with dead man control on the front
  • Roll-up door with two motors and roll-off protection according to UVV
  • Oven chamber made of stainless steel sheet
  • Inner tank floor with rails for loading trolleys
  • Loading trolley made entirely of stainless steel
  • Louvre plates on the air inlet side to subsequently optimize the temperature tolerance
  • Adjustable fresh air and recirculated air sliders for the front and rear areas
gallery
Roll-up door lifting door hinged door oven customer example 05 01Roll-up door lifting door hinged door oven customer example 05 02Roll-up door lifting door hinged door oven customer example 05 03
CUSTOMER EXAMPLE 6 - up to 300 °C - 2,150 × 2,150 × 1,000 mm - A# 2212314
Dimensions2,150 × 2,150 × 1,000 mm
Operating temperatureup to 300 °C
Heating output40kW
Circulation fan2×1.1kW
Airflowhorizontal

(W × D × H) This lifting door oven is used for heating/drying solvent-free, water-jet cut graphite components.

Design
  • Electronic master slave temperature control, program controller (master) with up to 8 programs with 16 segments each, temperature controller (slave) for the rear oven segment, setpoint specification of the slave controller takes place via the setpoint output of the master controller
  • Overtemperature protection device consisting of two electronic overtemperature protection controllers
  • RS485 interface with BluControl software for user-friendly program input
  • Indicator and warning lights for status messages
  • Door limit switch switches off the heating after opening the door
  • Door opening upwards relieved with chains and counterweights, with chain gear to synchronize the door movement
  • all-round temperature-resistant seal for the door
  • Power switching: solid state relay
  • Feeding trolley consisting of:
  • All-round stainless steel rectangular tube frame with cross beams with stainless steel perforated plate support (perforations 10 × 10mm, ridge side downwards)
  • Dimensions: 2015 × 2015 × approx. 45mm high plus 120mm for gray cast iron fixed castors
  • Maximum load of the loading trolley: 300kg surface load
  • Support height of the loading trolley suitable for the upstream water jet system
  • Oven chamber made of stainless steel sheet
  • Breakthrough on the right side of the oven for optional process gas supply
  • Horizontal airflow
  • Blind panels on the left side of the interior for subsequent optimization of temperature tolerance
  • adjustable fresh air and recirculating air slider
  • Protection class switch box: IP 65 (fan IP55)
  • Protection class oven (heater cover): IP 21
gallery
Roll-up door lifting door hinged door oven customer example 06 01Roll-up door lifting door hinged door oven customer example 06 02Roll-up door lifting door hinged door oven customer example 06 03Roll-up door lifting door hinged door oven customer example 06 04Roll-up door lifting door hinged door oven customer example 06 05
Related products

More industrial ovens

Circulation/fresh-air ovens
Circulation/fresh-air ovens
Standard & Special
Tempering, drying and heating with defined air flow.
upon request
Drawer ovens
Drawer ovens
Linearly guided supports
For panels, molded parts and defined loading levels.
up to 300 °C
Bogie hearth ovens
Bogie hearth ovens
With loading aids
For heavy parts and retractable loading.
upon request

Roll-up door/lifting door ovensenquiry

Door concept · Installation space · Temperature · Loading

+43 7434 43880-0info@kitmail.at